+ Spanish quality and turnkey installation +38 (063) 283-31-48

Tired of your lift being out of service again? Install a Spanish lift that runs quietly and looks premium.

Build your own lift car in 3D

We represent Spanish MP lifts in Ukraine. MP sources some components from specialist EU manufacturers, including German ones; the exact set depends on the model and configuration. We have 20 years of experience and our own architect and crews, and we take on the most complex projects on a turnkey basis together with MP. The site survey and quote are free of charge.

Scroll down,
the car goes up

2MP lifts

MP lifts with rated loads from 180 to 6500 kg

The Spanish manufacturer MP Lifts produces seven main models: lifts with and without a machine room, lifts for older buildings with tight shafts, hydraulic lifts and a platform lift for private homes with a pit from 200 mm. Hospital bed and goods lifts are versions of the same models.

All MP lift models
MP Mobi lift with a blue door portal and open stainless steel doors
MP Mobi. Manufacturer’s photo
MP range: rated load and speed
ModelLoad, kgRange, kgm/s
MP GOMachine-room-less320-16001.0-1.6
MP FlexFor existing buildings and tight shafts180-10001.0
MP MegaHigh capacity, up to 86 persons2000-65000.5-1.6
MP GO RoomGearless, with machine room320-11251.0-1.6
MP VGeared, with machine room320-30001.0-1.6
MP HydroHydraulic320-65000.4-0.63
MP MobiPlatform lift, pit from 200 mm180-10000.15

These are the manufacturer’s typical values. The exact dimensions for your building are set by the drawing.

3Panoramic

Panoramic lifts with a glass shaft

A lift with a glass car and glass shaft is installed in a lobby, foyer or atrium, where it is always on view. We are preparing an MP lift of this kind, 630 kg with three stops, for the drama theatre in Ivano-Frankivsk.

About panoramic lifts
Panoramic lift in a glass shaft in the drama theatre foyer, with stone columns and parquet flooring. Rendering
Drama theatre foyer, Ivano-Frankivsk. Rendering
Round MP panoramic lift car against a red steel frame
Round MP lift car. Manufacturer’s photo

43D configurator

Build a lift car in 3D

In the configurator you can choose the walls, ceiling, floor, doors and operating panel, step inside the car and check whether it fits in the shaft. If you do not know the pit depth, click “don’t know” and an engineer will confirm it.

Open the 3D configurator

No registration required. You can save the finished design as a link or send it to us straight away.

11002100
Try a different wall finish

Lift car 1100 × 1400 mm (external dimensions per the manufacturer’s table). This is a rendering; the final specification is confirmed by an engineer.

5Turnkey

Turnkey lift including the shaft

We have our own architect and our own construction and installation crews, so you will not have to coordinate several contractors. We carry out the most complex projects together with MP.

How our turnkey service worksSpare parts catalogue
Cross-section of an old building with a built-in lift shaft. Rendering
Shaft in an old building. Rendering
  1. Site surveyWe visit the site and measure the shaft, or the space for it, free of charge. Then we calculate the cost.
  2. DesignOur architect fits the lift into the building, even where no one ever planned one.
  3. Construction worksWhere needed, we build the pit and headroom, strengthen floor slabs, erect an add-on steel-frame shaft and install glazing.
  4. Supply and installationWe supply the MP equipment, and our own crews install it.
  5. Conformity assessmentBefore commissioning, the lift undergoes conformity assessment under Ukraine’s Technical Regulation on Lifts (Cabinet of Ministers Resolution No. 438). We prepare the commissioning documents.
  6. MaintenanceOnce the lift is handed over, we maintain it. We order spare parts through the manufacturer’s service portal.

6Projects

Where MP lifts are in service

These projects were carried out by the manufacturer MP itself; the figures are based on its data. They show what kinds of tasks the factory has already handled.

  • 60units of lifting equipmentNATO HeadquartersBrussels. A building of about 250,000 m²
  • 12.000kg goods liftITERCadarache, France. Gearless; one of five highly complex lifts designed to withstand earthquakes, magnetic fields and radiation
  • 40+liftsSeville MetroA line with 21 stations. MP designed, manufactured and installed these lifts and maintains them
  • 7lifts and platformsPort HouseAntwerp. A building by architect Zaha Hadid
  • 24liftsCaja MágicaMadrid
  • 1glass carPalace of Charles V, AlhambraGranada. A lift in a UNESCO World Heritage Site; the shaft structure was not altered

MP lifts are already in service in Ukraine too, including in Kyiv and Dnipro: in hospitals, outpatient clinics and administrative buildings. They were installed by various companies.

All projects

7What’s inside

Made in Spain, with components from specialist EU manufacturers, including German ones

MP makes its own traction machines, controllers, standard doors, cars and frames at its plants in Seville and Zaragoza. According to MP, the remaining components are sourced from specialist EU manufacturers, including German ones. For example, MP’s technical documentation specifies an encoder from the German company HEIDENHAIN for the maGO machine, and ropes from the German company PFEIFER DRAKO for small-diameter traction ropes.

The specific components depend on the model and configuration. We include the exact list of safety components in the documentation for your lift.

What is inside an MP lift
MP maGO gearless machine with a yellow traction sheave
MP makes the maGO machine in-house. Manufacturer’s photo
  • 50 ± 3dB(A)noise in the MP GO car under ISO 18738
  • 516kWh per yearclass A under VDI 4707: MP GO, 630 kg, 6 stops, 1 m/s
  • If the power fails, the MP GO car travels to the nearest stop on its own and opens the doors.

8About us

20 years of experience, our own architect and our own crews

PE SRBK PORTAL operates under the LIFTPORTAL™ brand. We build shafts, strengthen floor slabs, carry out glazing and install lifts. In Ukraine we represent MP lifts: we select, supply, install and maintain them.

About the company Choosing a lift with Claude or ChatGPT
  • 163signed contracts with 42 clients in the open Prozorro register, as of July 2026
  • 10regions where we have projects. We have a branch in Lviv and an installation crew in Kyiv
  • We also installed a panoramic lift for the regional administration in Chernivtsi and built a glass shaft in Dolyna. The equipment there is from other manufacturers, not MP.

9Contacts

Book a site survey and a quote

You can build the car yourself in the configurator, or leave your name and phone number and we will go through the details in a call.

Build a lift car in 3D

We will call you back

We only need your name and phone number. The site survey is free; we calculate the cost after it. We call during working hours, Mon-Fri 08:00-18:00. How we protect your data