MP lift cars
MP produces the Viliter, Style, Supra, Supramax, Ambientum and Panoramics car series. Lift car design depends on the building, so we have put together thirteen ready-made cars. Each can be opened in 3D and its finishes changed for your project.
Build a lift car in 3DView from the car. Rendering
2Residential
Cars for residential buildings
We chose these three cars for a new build, for lift replacement in an existing shaft and for a private home.
-
Rendering Lift car for a new build
For a new residential building or complex.
Open in 3D -
Rendering Lift car for an old shaft
For an existing building that already has a shaft.
Open in 3D -
Rendering Home lift car
For a building of several floors.
Open in 3D
2Public buildings and warehouses
Cars for hotels, offices, hospitals, schools and warehouses
These buildings place different demands on the car. In a hotel, appearance matters; in an office, handling capacity; in a hospital, room for a bed and easy cleaning; in a school, the budget; and in a warehouse, impact resistance.
-
Rendering Lift car for a hotel
For a hotel or apartments.
Open in 3D -
Rendering Lift car for an office centre
For an office building.
Open in 3D -
Rendering Hospital bed lift car
For a hospital or outpatient clinic.
Open in 3D -
Rendering Lift car for a school or outpatient clinic
For a school, nursery or outpatient clinic on a limited budget.
Open in 3D -
Rendering Goods lift car
For a warehouse, production facility or restaurant kitchen.
Open in 3D
2Glass
Panoramic cars with glass walls
These include clear, tinted, round and semicircular cars, as well as the car we are preparing for the drama theatre in Ivano-Frankivsk.
-
Rendering Panoramic car in an atrium
For an atrium, shopping centre or lobby.
Open in 3D -
Rendering Tinted panoramic car
For buildings that need both glass and privacy.
Open in 3D -
Rendering Round panoramic car
For an atrium, museum or theatre, as a bespoke project.
Open in 3D -
Rendering Semicircular panoramic car
For a country house, resort or restaurant with a view, as a bespoke project.
Open in 3D -
Rendering Panoramic lift for a drama theatre
We are preparing it for the drama theatre in Ivano-Frankivsk.
Open in 3D
How to use a ready-made car
A ready-made car is a preset design in which any parameter can be changed.
The catalogue shows a car as it was photographed. Here, each car can be opened in 3D to see the walls, ceiling, floor and operating panel. In the configurator you can replace granite with rubber, remove the mirror, fit different buttons and step inside. You can save your design as a link; no registration is required.
We set up these cars the way we would for a real project. The load, number of stops and materials match the brief, so any of them can serve as a starting point. Anything the manufacturer makes only by separate agreement is marked as such.
A printable catalogue is also available: MP car finishes in PDF. We select the lift model for the car based on the shaft; see MP lift models with and without a machine room, and hydraulic ones.
Lift car finishes: main materials
Colours on screen are approximate; before production we agree them using the manufacturer’s samples and codes.
Ceiling models and car lighting
We show six ceiling models that differ in their lighting pattern. In a small car, the ceiling has a noticeable effect on the overall look.
Rendering.
MP car series
The series determines what the walls are made of and which finishes are available.
| Viliter | Powder-coated steel in a wide range of colours. |
|---|---|
| Style | Laminated panels, including wood-grain textures. |
| Supra | Stainless steel walls, skirting and entrance. |
| Supramax | Panel with milled wood-effect phenolic laminate. |
| Ambientum | Glass and photo printing, JL and Unike ranges. |
| Panoramics | Panoramic cars with glass walls. More on the Panoramic lift page. |
Questions about ready-made cars
Can I change a ready-made car?
Yes, any ready-made car can be opened in the configurator, changed and saved as your own design via a link.
Will the car on screen look the same in real life?
The shape and materials of the car in 3D match your choice, but the colour on screen is approximate. We agree the final finishes using the manufacturer’s codes, and confirm the shade of tinted glass with a sample before production.
Will this car fit in my shaft?
You can make a preliminary check of whether the car fits in the shaft on the Lift dimensions page by entering the shaft dimensions. We will give the final answer based on the drawing for your project.
How much does a car like this cost?
There are no lift car prices on the site. The cost of a lift depends on the shaft, construction works and installation, so we calculate it after a free site survey. We explain what is included on the How much does a lift cost page.
43D configurator
Start from any ready-made car
You can also open an empty configurator and set up a car from scratch.
Open the 3D configurator