MP GO Room with a machine room
MP GO Room is a gearless lift for buildings that already have a machine room and have no need to remove it. The machine is located in that room; the rated load is 320-1125 kg.
Build a lift car in 3DView from the car. Rendering
2In Ukraine
Replacement of three lifts in Dnipro
The manufacturer shows this site in its portfolio. Three lifts were replaced in a public building in 2018-2019.
- 2 + 1lifts630 kg and 450 kg
- 7stops1 m/s
- SupracarStainless steelA car of this series can be built in our configurator.
This site was installed by another company; in Ukraine, MP lifts have been installed by various firms. We can provide the address on request.
MP GO Room and MP GO compared
The main difference between these models is where the machine is located. This also affects the rated load, number of stops and shaft dimensions.
| Parameter | MP GO Room | MP GO |
|---|---|---|
| Machine | in the machine room | in the shaft |
| Load | 320-1125 kg | 320-1600 kg |
| Persons | 4-15 | 4-21 |
| Stops | up to 16 | up to 32, over 16 to be confirmed |
| Shaft for 630 kg | 1650 × 1650 mm | 1600 × 1650 mm |
| Pit for 630 kg | 1050 mm | 1025 mm |
| Headroom for 630 kg | 3400 mm | 3400 mm |
MP GO Room cars and shafts
The table lists seven typical cars to EN 81-20/50. The 8-person car is shown to scale in the diagram.
| Persons | Rated load, kg | Car, external | Shaft W × D | Pit | Headroom |
|---|---|---|---|---|---|
| 4 | 320 | 800 × 1100 | 1350 × 1350 | 1050 / 1155 | 4400 |
| 5 | 375 | 950 × 1050 | 1500 × 1300 | 1050 / 1155 | 3400 / 3600 |
| 6 | 480 | 1000 × 1250 | 1550 × 1500 | 1050 / 1155 | 3400 / 3600 |
| 8 | 630 | 1100 × 1400 | 1650 × 1650 | 1050 / 1155 | 3400 / 3600 |
| 10 | 800 | 1200 × 1500 | 1800 × 1800 | 1050 / 1300 | 3400 / 3650 |
| 13 | 1000 | 1100 × 2100 | 1650 × 2350 | 1050 / 1400 | 3400 / 3650 |
| 15 | 1125 | 1200 × 2150 | 1800 × 2450 | 1050 / 1400 | 3400 / 3650 |
Where there is a slash, values are given for 1.0 and 1.6 m/s. Car dimensions are external, per the manufacturer’s table. For a specific site we confirm the dimensions from the drawing.
When we recommend MP GO Room
- Machine room in good working orderIt does not need to be dismantled, and the roof and top floor remain unchanged. When replacing a lift in an existing building, this often decides the choice of model.
- Standard shaftIf the shaft is narrow and the pit shallow, MP Flex is a better fit; it is also available with a machine room.
- Load within 1125 kgFor heavier loads with a machine room, there is MP V up to 3000 kg and MP Mega from 2000 kg.
MP GO Room car finishes
Car finishes do not depend on the machine room; the options are the same as for other models.
Questions about MP GO Room
Will our old machine room be suitable?
Whether an old machine room is suitable for MP GO Room is decided at the site survey: we check the room dimensions, the condition of the slab above the shaft, access and power supply. There is no general rule here, so we will answer after visiting the site.
How does MP GO Room differ from MP V?
MP GO Room is gearless, with loads up to 1125 kg. MP V is geared, with loads of up to 3000 kg. If 1125 kg is enough for you, we compare both models for your site.
I saw MP GO! C in the catalogue. Is it the same lift?
Yes, in the manufacturer’s catalogue this model is called MP GO! C, while on the MP website it is named MP GO Room.
More about the MP GO Room lift
43D configurator
Car for an existing shaft in 3D
For this model we chose a six-person car in an existing shaft with a machine room. You can change the finishes and look at the car from the inside.
Build a lift car in 3D