MP lift models
MP Lifts is a Spanish lift manufacturer headquartered in Seville. The MP range comprises seven main lifts. We will select the right one for your building type, rated load and shaft dimensions.
Build a lift car in 3DView from the car. Rendering
2Selection
Which lift model suits your building
We have described seven typical cases. Choose the one closest to your building and go to the model page.
- A new building or office where a machine room on the roof is not wanted.MP GO
- An old building with a narrow shaft where the pit can hardly be deepened.MP Flex
- The machine room already exists, it is in good condition, and the load does not exceed 1125 kg.MP GO Room
- There is a machine room too, but a heavier load is needed, up to 3000 kg.MP V
- A car for dozens of people and loads from 2000 kg.MP Mega
- Low travel, up to 15 m, and a heavy load, or a round glass car in the middle of a hall.MP Hydro
- A private house or public building with no room for a deep pit and no need for high speed.MP Mobi
Panoramic, hospital bed and goods lifts are versions of the same models, with pages of their own: panoramic lifts, hospital bed lifts, goods lifts.
MP model comparison table
The table shows the manufacturer’s typical values for a concrete shaft. The bar shows the load range each model covers.
| Model | Load scale | Rated load, kg | Persons | Speed, m/s | Stops | Pit, mm | Headroom, mm |
|---|---|---|---|---|---|---|---|
| MP GO | 320-1600 | 4-21 | 1.0; 1.6; 2.5 optional | up to 16, more to be confirmed | 1025-1400 | 3400-4400 | |
| MP Flex | 180-1000 | 2-13 | 1.0 | up to 16 | 312-850 | 2800-3800 | |
| MP Mega | 2000-6500 | 26-86 | 1.0-1.6; 0.5 from 5500 kg | to be confirmed | 1400-1600 | 3700-4500 | |
| MP GO Room | 320-1125 | 4-15 | 1.0; 1.6 | up to 16 | 1050-1400 | 3400-4400 | |
| MP V | 320-3000 | 4-40 | 1.0-1.6 | up to 16 | 1025-1500 | 3400-3700 | |
| MP Hydro | 320-6500 | 4-86 | 0.4-0.63 | up to 6 | 1050-1400 | 3350-3800 | |
| MP Mobi | 180-1000 | 2-13 | 0.15 | up to 6 | from 200 | 2390-2850 |
The load scale is indicative and non-linear. The exact dimensions for your site will be on the drawing. More about lift dimensions.
Each model in brief
-
MP GOA gearless machine-room-less lift with a maGO machine and an ecoGO controller. The automatic rescue device for power failures is part of the standard specification.320-1600kg4-21persons -
MP FlexA lift for existing buildings, made by MP in four series. The machine is mounted on the rear or side wall, shaft width from 885 mm.180-1000kg2-13persons -
MP MegaA high-capacity lift with a car for 26-86 persons. Available with or without a machine room.2000-6500kg26-86persons -
MP GO RoomA gearless lift with the machine in a machine room. The manufacturer’s portfolio includes the replacement of three such lifts in Dnipro.320-1125kg4-15persons -
MP VA geared lift with a machine room and loads up to 3000 kg. According to the manufacturer, 679 of these lifts operate in the Gardenia complex in Cairo.320-3000kg4-40persons -
MP HydroA hydraulic lift for loads up to 1000 kg without a machine room and up to 6500 kg with one. The round car at the Kraków Opera works on this principle.320-6500kg4-86persons -
MP MobiA vertical platform lift for a private house or public building. It has the shallowest pit in the range, from 200 mm, and even less on request.180-1000kg2-13persons
Manufacturer’s photos and renderings. Photos may show other configurations of the same model.
About the manufacturer
Why we represent MP lifts
We have worked with lifts for 20 years and want to install ones that do not need a repair visit every week.
That is why we represent Spanish MP lifts in Ukraine. The manufacturer makes traction machines, controllers, standard doors, cars and frames itself at its plants in Seville and Zaragoza. According to the manufacturer, it sources the remaining components from specialised EU suppliers, including German ones. For example, the documentation for the maGO machine specifies a Heidenhain encoder, and PFEIFER DRAKO ropes for small-diameter ropes.
The set of components depends on the model and configuration. We attach the exact list of safety components to the documents for your lift.
A lift you do not pay for twice. MP lifts are not budget lifts, and we say so up front. We calculate the exact amount for your shaft after a site survey.
- 165.000+lifts manufactured
- 100+countries
- 2own factories in Spain
What MP does not make
MP does not make these products, and it is better to know this in advance.
- Escalators and moving walkways. MP does not make them, so we do not offer them under this brand.
- Inclined platform lifts. MP does not make these either; instead it offers the MP Mobi vertical platform lift.
- Small goods lifts for kitchens and cafés. MP goods lifts have a rated load from 1500 kg; they are covered on the Goods lift page.
Questions about choosing a lift model
Why are there no prices on the website?
The cost of each lift depends on the travel, number of stops, finishes, doors and scope of building works. That is why we quote a price after a free site survey, once these data are known.
Is a 1100 × 1400 mm car the internal size?
No, in MP tables this is the external car size. We take the internal size from the drawing for your site, so the website does not give clear internal dimensions. The 2100 mm height in the manufacturer’s tables, however, is internal.
What if my shaft is smaller than in the table?
MP tables give typical shaft dimensions, and the manufacturer notes that the lift can be adapted to smaller dimensions on request. We survey the shaft and send the manufacturer a request. We can give you the result after that.
What requirements apply in Ukraine?
Before commissioning, the lift undergoes conformity assessment under Ukraine’s Technical Regulation on Lifts (Cabinet of Ministers Resolution No. 438). We prepare the commissioning documents.
43D configurator
If you do not yet know which model you need
In the configurator you can first build a car you like, and we will select the model after the site survey. No registration required.
Open the 3D configurator