Home lift car
For a private house on three levels, we chose the MP Mobi HOME car. Light oak-effect panels and soft lighting suit a residential interior, and the lift travels one floor in twenty seconds.
Open in 3DView from the car. Rendering
2For a house with several floors
Four-person car, three stops
We chose the colours and lighting for a residential interior. All of this can be changed in the configurator.
| Load | 315 kg, 4 persons |
|---|---|
| Stops | 3 |
| Lift car | 1000 × 1250 mm, outer dimension per the manufacturer’s catalogue |
| Drive | Hydraulic, MP Mobi HOME, 0.15 m/s |
| Series | Style Newform |
| Car walls | Oak (NE09) |
| Ceiling | L40: four spotlights, white |
| Floor | 3 mm rubber, classic wood |
| Mirror | Narrow strip in the middle of the rear wall |
| Car operating panel | Fusion Supra |
Walls, ceiling and floor for the home
Style Newform NE09 panels are a light oak-effect laminate. It is not glossy and goes well with wood, plaster and textiles. The skirting is natural aluminium AL12, and the ceiling is white with four L40 spotlights. Their light is softer than that of a continuous panel and will not dazzle in the evening.
The R74 “Classic wood” rubber floor looks like parquet. At home this is practical, because the floor copes with wet shoes and a dog’s paws, just like in a hallway. A narrow mirror in the middle of the rear wall makes the car feel more spacious, and the partial-height Fusion panel takes up less wall space than a column.
Where home lifts are installed
In the manufacturer’s photos, MP Mobi is installed in a living room and under a staircase.
MP Mobi speed, pit and headroom
MP Mobi travels at 0.15 m/s, so it covers three metres between floors in twenty seconds. For a private house, that is enough. This model needs a much smaller pit and headroom than a conventional lift: a pit from 200 mm (even less on request) and headroom of 2403-2580 mm. These values are possible only with compensatory safety measures; without them, the manufacturer specifies 645 mm and 2814 mm.
In terms of documentation, it is a vertical platform lift under EU machinery legislation. Power supply is three-phase, with single-phase 230 V as an option. The four-person, 315 kg car has outer dimensions of 1000 × 1250 mm according to the manufacturer’s catalogue, with a 1400 × 1550 mm shaft.
Questions about this car
Can I have a different colour instead of oak?
Yes. The Style series has other panels too, or you can choose Viliter coloured steel or Supra stainless steel. In the configurator you can see the difference immediately.
Will a wheelchair fit?
The manufacturer’s table gives only the outer car dimensions. We confirm clear entry with an attendant against the internal dimension drawing.
43D configurator
Choose a car for your home
In the configurator you can change the colour, lighting and number of stops. When you like an option, send us the link and the dimensions of the space for the shaft.
Open the 3D configurator