Goods lift car
This 2000 kg car is intended for a warehouse, production facility or restaurant kitchen. It has wide centre-opening doors, a chequer plate steel floor and bumper rails on the walls.
Open in 3DView from the car. Rendering
2For a warehouse, production facility or restaurant kitchen
2000 kg goods lift car
We chose the finishes by what wears out fastest in a goods lift.
| Load | 2000 kg, 26 persons |
|---|---|
| Stops | 3 |
| Car walls | Satin stainless steel (X02) |
| Ceiling | L100: framed light panel, painted white |
| Floor | Chequer plate steel sheet (C04) |
| Mirror | No mirror |
| Bumper rail | On the car walls |
| Doors | Satin stainless steel (X02) |
| Car height | 2200 mm |
| Car operating panel | Dardo buttons |
| Control | Universal |
What wears out first in a goods lift car
- FloorC04 chequer plate steel sheet. Trolley wheels do not slip on it, and the surface does not wear through as rubber can.
- WallsThe bumper rail takes impacts at pallet and hand truck height. There is no mirror in the goods lift car.
- ButtonsDardo is a flat protected button, IP64, EN 81-71 cat. 1. Warehouse dust does not harm it, and it can be pressed with gloves on.
“One call at a time” mode
This car uses universal mode: the lift serves one call at a time. In a warehouse this matters more than speed, because nobody can stop a loaded car on the way, and the doors will not open at an intermediate floor.
Centre-opening doors give a wide clear opening: 1300-2500 mm depending on the load, according to the manufacturer’s catalogue. Landing doors are supplied primed and painted on site to match the wall. A car height of 2200 mm instead of the typical 2100 mm gives extra room for a tall pallet. Three stops are shown as an example; they are easy to change in the configurator.
Models for a 2000 kg load
Two main models suit a two-tonne load. MP Mega is gearless, for 26 persons. According to the manufacturer’s table, the outer car dimensions are 1500 × 2700 mm without a machine room or 2000 × 2100 mm with one, with a 1400 mm pit and 3800 mm headroom. MP Hydro is hydraulic, 0.5 m/s, with a 2000 × 2500 mm car, a 2950 × 2500 mm shaft and a 1300 mm pit. For three stops, a hydraulic lift is often the better fit.
It will also suit a restaurant kitchen, but this is a full-size car, as MP does not make small kitchen dumbwaiters.
43D configurator
Check your pallet in the car
In 3D you can roughly assess how much space is left to the walls and doors. Send us the weight and dimensions of the load and the number of trips, and we will select a model.
Open the 3D configurator